Place the original and tap the [Preview] key.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
Tap the [Others>>] key, and tap the [Stamp] key.
Tap a tab to be printed, and tap the [Format] key.
The format of the [Text] tab can be entered using pre-set text or soft keyboard.
When you tap the tab, the display tab is switched.
Tap a key of the desired print position.
Tap any of [1] to [6] keys.
  • Tapping the [Detail] key allows you to configure setting for each tab such as a print color.
  • Tapping the [Layout] key allows you to check the printing position or detailed settings.
To cancel the text settings:
Tap the [Cancel All] key.
Check the preview image in the preview screen.
Check whether or not settings produce the required results.
To cancel all settings:
Tap the [CA] key.
Tap the [Color Start] or [B/W Start] key to start copying.
When making only one set of copies, you do not need to specify the number of copies.
To make two or more sets of copies:
Tap the copies display key to specify the number of copies.



  • If you select color printing, tap the [Color Start] key. Tapping the [B/W Start] key will print the stamp items in black and white even if color printing is specified.
  • If color printing is specified for the original in black and white, it is counted as a full color copy.

Setting using the [Text] tab
Tap the [Direct Entry] key in the [Text] tab to display the soft keyboard.
Use the soft keyboard to enter any characters.

Selecting the format from pre-set text
Tapping the [Pre-Set Select] key allows you to select the required one of the registered formats for printing.
Tapping the [Store/Delete] key allows you to edit, delete, or store pre-set text. To edit or store pre-set text, use the soft keyboard.